//=================================================================================================================
//-- Disable Create Class
// - OBS.: Only Downgrades
// - Type:
//   0 - Original
//   1 - Remove DL / SU / RF
//   2 - Remove SU / RF
//   3 - Remove RF
//=================================================================================================================
DisableCreateClassType = 1


no fucion

está funcionando normalmente

Source tienen que hacerle muchos arreglos

 golpes   pode ser que sim pode ser que não quem sabe. avezes os erros pode ser de um Bug entre uma cadeira e um teclado

#PAZ

Source tienen que hacerle muchos arreglos

 golpes   pode ser que sim pode ser que não quem sabe. avezes os erros pode ser de um Bug entre uma cadeira e um teclado

#PAZ

tente a resolução  1440x900 esse problema deu nesse tamanho aqui. nao testei maiores pq meu monitor o máximo é essa.

Source tienen que hacerle muchos arreglos

 golpes   pode ser que sim pode ser que não quem sabe. avezes os erros pode ser de um Bug entre uma cadeira e um teclado

#PAZ

tente a resolução  1440x900 esse problema deu nesse tamanho aqui. nao testei maiores pq meu monitor o máximo é essa.

Nesse caso algumas janelas podem ter algum problema por conta da resoluções faltando, por isso o erro de distorção. Porém nisso eu posso dar uma dica que me ajudou, que é quem tem monitores com essas resoluções podem estar redimensionando de acordo com essa resolução utilizada.

Source tienen que hacerle muchos arreglos

 golpes   pode ser que sim pode ser que não quem sabe. avezes os erros pode ser de um Bug entre uma cadeira e um teclado

#PAZ

tente a resolução  1440x900 esse problema deu nesse tamanho aqui. nao testei maiores pq meu monitor o máximo é essa.

tem q ter vista  qual o Limite da Resolução no Cliente desse Projeto. acredito que não foi Modificado pra mais e nem menos que 1366x768 acima disso da problemas mesmo...

update 9 very Good
Update 10 Super Bug LOL

I have all versions of ROX

Se tem só a 10 como tem todas? 

do you sell up11 update

Go develop yourself as well as your mouth first. Don't make your mouth too good. Be careful that I will post an update of 11 games. Hungry for money.  tabaco tabaco tabaco

BUG exp bar always 0
season 6
Normal level

master level exp bar OK

BUG exp bar always 0
season 6
Normal level

master level exp bar OK

i think you should use up9 it is much more stable or you can buy up11 from Denis Alves

BUG exp bar always 0
season 6
Normal level

master level exp bar OK

User.cpp - Change function gObjSetExperienceTable for:



Above follows the original experience formula, which goes up to level 400 normally.

The formula used in Up10's GameServer is the one that worked with a level above 400, but it was a project that I intended to put on but without success at that time. As until level 400 it was working normally, this detail went unnoticed and then I continued to use the formula, but the experience was working normally.

But it was solved in an update of Up10 a long time ago but I didn't update github because I had lost a lot of data from my computer. In up11 it already has a full operation and in Up12 it already works with maximum level.

BUG exp bar always 0
season 6
Normal level

master level exp bar OK

User.cpp - Change function gObjSetExperienceTable for:
 
Above follows the original experience formula, which goes up to level 400 normally.

The formula used in Up10's GameServer is the one that worked with a level above 400, but it was a project that I intended to put on but without success at that time. As until level 400 it was working normally, this detail went unnoticed and then I continued to use the formula, but the experience was working normally.

But it was solved in an update of Up10 a long time ago but I didn't update github because I had lost a lot of data from my computer. In up11 it already has a full operation and in Up12 it already works with maximum level.

still the same
always 0
i try in up9 and up10

BUG exp bar always 0
season 6
Normal level

master level exp bar OK

User.cpp - Change function gObjSetExperienceTable for:
 
Above follows the original experience formula, which goes up to level 400 normally.

The formula used in Up10's GameServer is the one that worked with a level above 400, but it was a project that I intended to put on but without success at that time. As until level 400 it was working normally, this detail went unnoticed and then I continued to use the formula, but the experience was working normally.

But it was solved in an update of Up10 a long time ago but I didn't update github because I had lost a lot of data from my computer. In up11 it already has a full operation and in Up12 it already works with maximum level.

still the same
always 0
i try in up9 and up10

Então o problema já sabemos que não é no emulador, está em quem maneja. Fiz o teste antes mesmo de publicar aqui, não iria postar algo para benefício dos outros de forma errônea. Reveja como você fez pois a partir do momento que se adiciona ela funciona. Se tiver testando com Experiência alta ela realmente vai passar imperceptível.

BUG exp bar always 0
season 6
Normal level

master level exp bar OK

User.cpp - Change function gObjSetExperienceTable for:
 
Above follows the original experience formula, which goes up to level 400 normally.

The formula used in Up10's GameServer is the one that worked with a level above 400, but it was a project that I intended to put on but without success at that time. As until level 400 it was working normally, this detail went unnoticed and then I continued to use the formula, but the experience was working normally.

But it was solved in an update of Up10 a long time ago but I didn't update github because I had lost a lot of data from my computer. In up11 it already has a full operation and in Up12 it already works with maximum level.

still the same
always 0
i try in up9 and up10

Então o problema já sabemos que não é no emulador, está em quem maneja. Fiz o teste antes mesmo de publicar aqui, não iria postar algo para benefício dos outros de forma errônea. Reveja como você fez pois a partir do momento que se adiciona ela funciona. Se tiver testando com Experiência alta ela realmente vai passar imperceptível.

ops sorry about that my mistake  golpes golpes
its working now

BUG exp bar always 0
season 6
Normal level

master level exp bar OK

User.cpp - Change function gObjSetExperienceTable for:
 
Above follows the original experience formula, which goes up to level 400 normally.

The formula used in Up10's GameServer is the one that worked with a level above 400, but it was a project that I intended to put on but without success at that time. As until level 400 it was working normally, this detail went unnoticed and then I continued to use the formula, but the experience was working normally.

But it was solved in an update of Up10 a long time ago but I didn't update github because I had lost a lot of data from my computer. In up11 it already has a full operation and in Up12 it already works with maximum level.

Estoy configurado un servidor con tus files. Encontré ese error también. Actualmente la configuración está max lvl400, y con exp dinámica x100-x10. Y aun así no aparece la exp en la barra de exp en la parte de abajo de la interface

BUG exp bar always 0
season 6
Normal level

master level exp bar OK

User.cpp - Change function gObjSetExperienceTable for:
 
Above follows the original experience formula, which goes up to level 400 normally.

The formula used in Up10's GameServer is the one that worked with a level above 400, but it was a project that I intended to put on but without success at that time. As until level 400 it was working normally, this detail went unnoticed and then I continued to use the formula, but the experience was working normally.

But it was solved in an update of Up10 a long time ago but I didn't update github because I had lost a lot of data from my computer. In up11 it already has a full operation and in Up12 it already works with maximum level.

still the same
always 0
i try in up9 and up10

Fix here

Code: [Select]

gLevelExperience[0] = 0;
		DWORD over = 1;
	for(int n=1;n <= MAX_CHARACTER_LEVEL;n++){
		gLevelExperience[n] = (((n+9)*n)*n)*10;
		if(n > 255){
			gLevelExperience[n] += (((over+9)*over)*over)*1000;
			over++;
		}
	}

Do you sell source up12 @Denis Alves ? 

Higher refining stone in jewel bank is in large amount how to solve?

How to fix Dark Knight "Dead Stab" skill not show wind effect?

How to fix Dark Knight "Dead Stab" skill not show wind effect?

Already fixed.

https://ibb.co/3Mbwxpn
fix ?

BUG SKILL OR MASTER TREE