Solo usuarios registrados pueden comentar y agradecer, Logueate o Registrate

Autor Topic: Error comando /reset 3 Quest  (Visto 1055 veces)

0 Miembros and 1 Guest are viewing this topic.

Offline anmx14 Posteado: May 29, 2020, 12:31:35 AM

  • 0 puntos por ventas
  • *
  • Rank: Dedicado
  • Posts: 38
  • Gracias recibida: 6
  • co
Buenas, tengo un problema ligeramente raro...

Y es que cuando haces la 3 evolucion y luego escribes /reset, automaticamente se borran los stast...

Cabe mencionar que el servidor no borra stats y probe el hacer 5 resets y ninguno me borro los stats...
El error proviene al momento de terminar la quest en crywolf y haces el reset..

Podrian ayudarme con eso por favor...


Offline z3r0x #1 Posteado: May 29, 2020, 12:44:17 AM

  • C++ Coder
  • 0 puntos por ventas
  • *
  • Rank: Destacado
  • Posts: 94
  • Gracias recibida: 601
  • ar
pero no detallas que files usas ni nada detalla mejor


Offline anmx14 #2 Posteado: May 29, 2020, 12:46:15 AM | Modificado: May 29, 2020, 10:13:50 PM by anmx14

  • 0 puntos por ventas
  • *
  • Rank: Dedicado
  • Posts: 38
  • Gracias recibida: 6
  • co

Offline anmx14 #3 Posteado: May 29, 2020, 12:53:18 AM

  • 0 puntos por ventas
  • *
  • Rank: Dedicado
  • Posts: 38
  • Gracias recibida: 6
  • co
[GameServerInfo]
;==================================================
; Post Command Settings
;==================================================
CommandPostType = 4

;==================================================
; Add Point Command Settings
;==================================================
CommandAddPointAutoEnable_AL0 = 1
CommandAddPointAutoEnable_AL1 = 1
CommandAddPointAutoEnable_AL2 = 1
CommandAddPointAutoEnable_AL3 = 1

;==================================================
; Change Command Settings
;==================================================
CommandChangeLimit_AL0 = 2
CommandChangeLimit_AL1 = 2
CommandChangeLimit_AL2 = 2
CommandChangeLimit_AL3 = 2

;==================================================
; Ware Command Settings
;==================================================
CommandWareNumber_AL0 = 5
CommandWareNumber_AL1 = 2
CommandWareNumber_AL2 = 3
CommandWareNumber_AL3 = 4

;==================================================
; Reset Command Settings
;==================================================            
CommandResetType = 0
CommandResetAutoEnable_AL0 = 1
CommandResetAutoEnable_AL1 = 1
CommandResetAutoEnable_AL2 = 1
CommandResetAutoEnable_AL3 = 1
CommandResetCheckItem_AL0 = 0
CommandResetCheckItem_AL1 = 0
CommandResetCheckItem_AL2 = 0
CommandResetCheckItem_AL3 = 0
CommandResetMove_AL0 = 1
CommandResetMove_AL1 = 1
CommandResetMove_AL2 = 1
CommandResetMove_AL3 = 1
CommandResetQuest_AL0 = 0
CommandResetQuest_AL1 = 0
CommandResetQuest_AL2 = 0
CommandResetQuest_AL3 = 0
CommandResetSkill_AL0 = 0
CommandResetSkill_AL1 = 0
CommandResetSkill_AL2 = 0
CommandResetSkill_AL3 = 0
CommandResetLevel_AL0 = 400
CommandResetLevel_AL1 = 400
CommandResetLevel_AL2 = 400
CommandResetLevel_AL3 = 400
CommandResetMoney_AL0 = 20000000
CommandResetMoney_AL1 = 15000000
CommandResetMoney_AL2 = 10000000
CommandResetMoney_AL3 = 10000000
CommandResetCount_AL0 = 1
CommandResetCount_AL1 = 1
CommandResetCount_AL2 = 1
CommandResetCount_AL3 = 1   
CommandResetLimit_AL0 = 10000
CommandResetLimit_AL1 = 10000
CommandResetLimit_AL2 = 10000
CommandResetLimit_AL3 = 10000
CommandResetLimitDay_AL0 = 10000
CommandResetLimitDay_AL1 = 10000
CommandResetLimitDay_AL2 = 10000
CommandResetLimitDay_AL3 = 10000
CommandResetLimitWek_AL0 = 10000
CommandResetLimitWek_AL1 = 10000
CommandResetLimitWek_AL2 = 10000
CommandResetLimitWek_AL3 = 10000
CommandResetLimitMon_AL0 = 10000
CommandResetLimitMon_AL1 = 10000
CommandResetLimitMon_AL2 = 10000
CommandResetLimitMon_AL3 = 10000
CommandResetStartLevel_AL0 = 1
CommandResetStartLevel_AL1 = 1
CommandResetStartLevel_AL2 = 1
CommandResetStartLevel_AL3 = 1
CommandResetPoint_AL0 = 0
CommandResetPoint_AL1 = 0
CommandResetPoint_AL2 = 0
CommandResetPoint_AL3 = 0
CommandResetPointRateDW = 100
CommandResetPointRateDK = 100
CommandResetPointRateFE = 100
CommandResetPointRateMG = 100
CommandResetPointRateDL = 100
CommandResetPointRateSU = 100
CommandResetPointRateRF = 100

;==================================================
; Master Reset Command Settings
;==================================================


CommandMasterResetType = 0   ; utilization mode (0=Keep Points/1=Reset Points).

; Check equipped items (0=No/1=Yes).
CommandMasterResetCheckItem_AL0 = 0
CommandMasterResetCheckItem_AL1 = 0
CommandMasterResetCheckItem_AL2 = 0
CommandMasterResetCheckItem_AL3 = 0

; Move character to safe zone (0=No/1=Yes).
CommandMasterResetMove_AL0 = 1
CommandMasterResetMove_AL1 = 1
CommandMasterResetMove_AL2 = 1
CommandMasterResetMove_AL3 = 1

; Clear character quests (0=No/1=Yes).
CommandMasterResetQuest_AL0 = 0
CommandMasterResetQuest_AL1 = 0
CommandMasterResetQuest_AL2 = 0
CommandMasterResetQuest_AL3 = 0

; Clear character skills (0=No/1=Yes).
CommandMasterResetSkill_AL0 = 1
CommandMasterResetSkill_AL1 = 1
CommandMasterResetSkill_AL2 = 1
CommandMasterResetSkill_AL3 = 1

; Required level to use "/mreset"
CommandMasterResetLevel_AL0 = 400
CommandMasterResetLevel_AL1 = 400
CommandMasterResetLevel_AL2 = 400
CommandMasterResetLevel_AL3 = 400

; Required reset to use "/mreset"
CommandMasterResetReset_AL0 = 0
CommandMasterResetReset_AL1 = 0
CommandMasterResetReset_AL2 = 0
CommandMasterResetReset_AL3 = 0

; Required money to use "/mreset"
CommandMasterResetMoney_AL0 = 0
CommandMasterResetMoney_AL1 = 0
CommandMasterResetMoney_AL2 = 0
CommandMasterResetMoney_AL3 = 0

; Amount of master resets gain utilizing
CommandMasterResetCount_AL0 = 1               
CommandMasterResetCount_AL1 = 1   
CommandMasterResetCount_AL2 = 1   
CommandMasterResetCount_AL3 = 1

; Maximum master resets
CommandMasterResetLimit_AL0 = 10000
CommandMasterResetLimit_AL1 = 10000
CommandMasterResetLimit_AL2 = 10000
CommandMasterResetLimit_AL3 = 10000

; Maximum master resets per day
CommandMasterResetLimitDay_AL0 = 1000
CommandMasterResetLimitDay_AL1 = 1
CommandMasterResetLimitDay_AL2 = 1
CommandMasterResetLimitDay_AL3 = 1

; Maximum master resets per week
CommandMasterResetLimitWek_AL0 = 1000
CommandMasterResetLimitWek_AL1 = 7
CommandMasterResetLimitWek_AL2 = 7
CommandMasterResetLimitWek_AL3 = 7

; Maximum master resets per month
CommandMasterResetLimitMon_AL0 = 30
CommandMasterResetLimitMon_AL1 = 30
CommandMasterResetLimitMon_AL2 = 30
CommandMasterResetLimitMon_AL3 = 30

; Character level after utilizing "/mreset"
CommandMasterResetStartLevel_AL0 = 400
CommandMasterResetStartLevel_AL1 = 400
CommandMasterResetStartLevel_AL2 = 400
CommandMasterResetStartLevel_AL3 = 400

; Character reset after utilizing "/mreset"
CommandMasterResetStartReset_AL0 = 1
CommandMasterResetStartReset_AL1 = 1
CommandMasterResetStartReset_AL2 = 1
CommandMasterResetStartReset_AL3 = 1

; Amount of points gain
CommandMasterResetPoint_AL0 = 400
CommandMasterResetPoint_AL1 = 400
CommandMasterResetPoint_AL2 = 400
CommandMasterResetPoint_AL3 = 400

;  Percentage of points gain
CommandMasterResetPointRateDW = 400
CommandMasterResetPointRateDK = 400
CommandMasterResetPointRateFE = 400
CommandMasterResetPointRateMG = 400
CommandMasterResetPointRateDL = 400
CommandMasterResetPointRateSU = 400
CommandMasterResetPointRateRF = 400

;==================================================
; Marry Command Settings
;==================================================
CommandMarryLevel = 150
CommandMarryCost = 350
CommandMarryNoticeDelay = 60
CommandMarryMinTime = 604800
CommandMarryOnlyGM = 1

;==================================================
; Command Open WareHouse
;==================================================
CommandOpenWareOnlySafeZone = 1

;==================================================
; Command Change Class
;==================================================
CommandChangeClassToDW = 1
CommandChangeClassToDK = 1
CommandChangeClassToELF = 1
CommandChangeClassToMG = 1
CommandChangeClassToDL = 1
CommandChangeClassToSU = 1

;==================================================
; Reward Command Settings
;==================================================
CommandRewardMaxType = 3
CommandRewardMaxValue = 100
CommandRewardType1Text = [%s] %s foi prêmiado com %d Cash(s)!
CommandRewardType2Text = [%s] %s foi prêmiado com %d Gold(s)!
CommandRewardType3Text = [%s] %s foi prêmiado com %d PcPoint(s)!

;==================================================
; RewardAll Command Settings
;==================================================
CommandRewardAllMaxType = 3
CommandRewardAllMaxValue = 100
CommandRewardAllType1Text = [%s] Adicionado %d Cash(s) para todos!
CommandRewardAllType2Text = [%s] Adicionado %d Gold(s) para todos!
CommandRewardAllType3Text = [%s] Adicionado %d PcPoint(s) para todos!

;==================================================
; Command Rename (Premium)
;==================================================
CommandRenameDelay_AL0 = 60
CommandRenameDelay_AL1 = 60
CommandRenameDelay_AL2 = 60
CommandRenameDelay_AL3 = 60
CommandRenameNeedTicket = 0

;==================================================
; Gift Command Settings (/presente)
; Dropa um item da EventItemBag Gift!
;==================================================
CommandGiftLimit = 5

;==================================================
; Command Help (/ajuda)
; Recommended Max 5 monsters
;==================================================
CommandHelpMonsterIndex = 151
CommandHelpMonsterAmount = 3


Offline anmx14 #4 Posteado: May 29, 2020, 08:53:35 PM

  • 0 puntos por ventas
  • *
  • Rank: Dedicado
  • Posts: 38
  • Gracias recibida: 6
  • co

Offline 102pe #5 Posteado: May 29, 2020, 08:58:52 PM

  • Colaborador
  • 0 puntos por ventas
  • *
  • Rank: Puto amo
  • Posts: 316
  • Gracias recibida: 6034
  • pe
=================================================
Reset Command Settings
==================================================

CommandResetType -> "/reset" utilization mode (0=Keep Points/1=Reset Points).
CommandResetAutoEnable_AL0 -> "/reset auto" utilization state (0=Off/1=On).
CommandResetAutoEnable_AL1 -> "/reset auto" utilization state (0=Off/1=On).
CommandResetAutoEnable_AL2 -> "/reset auto" utilization state (0=Off/1=On).
CommandResetAutoEnable_AL3 -> "/reset auto" utilization state (0=Off/1=On).
CommandResetCheckItem_AL0 -> Check equipped items (0=No/1=Yes).
CommandResetCheckItem_AL1 -> Check equipped items (0=No/1=Yes).
CommandResetCheckItem_AL2 -> Check equipped items (0=No/1=Yes).
CommandResetCheckItem_AL3 -> Check equipped items (0=No/1=Yes).
CommandResetMove_AL0 -> Move character to safe zone (0=No/1=Yes).
CommandResetMove_AL1 -> Move character to safe zone (0=No/1=Yes).
CommandResetMove_AL2 -> Move character to safe zone (0=No/1=Yes).
CommandResetMove_AL3 -> Move character to safe zone (0=No/1=Yes).

Esta es la descripción de la sección que necesitas.

Recuerda que esa config se debe aplicar en todos tus servidores (incluyendo el gscs).

Saludos,
Jadoo
Contacto:
1. WhatsApp Link disponible para celular o Web WhatsApp

Offline anmx14 #6 Posteado: May 29, 2020, 11:22:18 PM

  • 0 puntos por ventas
  • *
  • Rank: Dedicado
  • Posts: 38
  • Gracias recibida: 6
  • co
Tema solucionado, pueden cerrar el tema.


Offline z3r0x #7 Posteado: May 30, 2020, 12:34:50 AM

  • C++ Coder
  • 0 puntos por ventas
  • *
  • Rank: Destacado
  • Posts: 94
  • Gracias recibida: 601
  • ar
Citar
Tema solucionado, pueden cerrar el tema.

pone la solucion para futuros!!


Offline anmx14 #8 Posteado: May 30, 2020, 12:53:23 AM

  • 0 puntos por ventas
  • *
  • Rank: Dedicado
  • Posts: 38
  • Gracias recibida: 6
  • co
Citar
Tema solucionado, pueden cerrar el tema.

pone la solucion para futuros!!

La solucion es editar el archivo "command.dat" del CS "\GameServerCS\DATA"

Debido a que Crywolf se encuentra conectado al GameServerCS y por ende es una configuracion aparte.


Solo usuarios registrados pueden comentar y agradecer, Logueate o Registrate


 

Related Topics

  Subject / Started by Replies Last post
0 Replies
957 Views
Last post June 01, 2017, 08:57:11 PM
by FrancoB
3 Replies
2157 Views
Last post March 07, 2018, 10:27:03 PM
by draguj
6 Replies
1503 Views
Last post May 05, 2020, 12:34:04 PM
by PIRELA
3 Replies
1011 Views
Last post May 24, 2019, 11:18:23 AM
by Endeverafter
1 Replies
515 Views
Last post August 23, 2020, 12:10:57 PM
by czrdiamond