Problema con el comando /reset muemu - Soporte / Ayudas - TUServerMU

Autor Topic: Problema con el comando /reset muemu  (Visto 278 veces)

0 Miembros and 1 Guest are viewing this topic.

Offline sofertec on: October 12, 2017, 12:49:34 AM

  • *
  • Rank: Principiante
  • Posts: 24
  • Gracias recibida: 33
Hola chicos tengo un problema con el comando /reset , en mi servidor se resetea lvl 400 y quina puntos. Al momento de haces el reset lo hace bien pero en vez de dar 400 puntos como configure yo da 420 y esos 20 de mas ni siquiera se suman osea si tenes dos reset tendrías que tenes 840 puntos pero no te pone 820 puntos alguien sabe por que ?

Offline Tauro14 #1 on: October 12, 2017, 06:11:03 AM

  • *
  • Rank: Sup. destacado
  • Posts: 112
  • Gracias recibida: 611
ami tambien me paso lo mismo y lo deje asi solo da 20puntos nada mas...

Offline louis #2 on: October 12, 2017, 08:37:35 AM

  • C++ Coder
  • *
  • *
  • Rank: Avanzado
  • Posts: 139
  • Gracias recibida: 1362
Se configura como 380 entonces ^^

Offline Evangelio #3 on: October 12, 2017, 09:57:37 AM

  • *
  • Rank: Sup. destacado
  • Posts: 102
  • Gracias recibida: 130
Deja tu configuración del reset para ver.
De paso revisa que este asi tu config para que te de 400pts por Reset.

« Ultima edicion: October 12, 2017, 11:08:22 AM by Evangelio »

Offline sofertec #4 on: October 12, 2017, 11:29:51 PM

  • *
  • Rank: Principiante
  • Posts: 24
  • Gracias recibida: 33
Code: [Select]
;==================================================
; Reset Command Settings
;==================================================
CommandResetSwitch = 1
CommandResetType = 1
CommandResetEnable_AL0 = 1
CommandResetEnable_AL1 = 1
CommandResetEnable_AL2 = 1
CommandResetEnable_AL3 = 1
CommandResetAutoEnable_AL0 = 0
CommandResetAutoEnable_AL1 = 0
CommandResetAutoEnable_AL2 = 0
CommandResetAutoEnable_AL3 = 0
CommandResetCheckItem_AL0 = 0
CommandResetCheckItem_AL1 = 0
CommandResetCheckItem_AL2 = 0
CommandResetCheckItem_AL3 = 0
CommandResetMove_AL0 = 1
CommandResetMove_AL1 = 1
CommandResetMove_AL2 = 1
CommandResetMove_AL3 = 1
CommandResetQuest_AL0 = 0
CommandResetQuest_AL1 = 0
CommandResetQuest_AL2 = 0
CommandResetQuest_AL3 = 0
CommandResetSkill_AL0 = 0
CommandResetSkill_AL1 = 0
CommandResetSkill_AL2 = 0
CommandResetSkill_AL3 = 0
CommandResetLevel_AL0 = 600
CommandResetLevel_AL1 = 600
CommandResetLevel_AL2 = 600
CommandResetLevel_AL3 = 600
CommandResetMoney_AL0 = 10000000
CommandResetMoney_AL1 = 7000000
CommandResetMoney_AL2 = 7000000
CommandResetMoney_AL3 = 7000000
CommandResetCount_AL0 = 1
CommandResetCount_AL1 = 1
CommandResetCount_AL2 = 1
CommandResetCount_AL3 = 1
CommandResetLimit_AL0 = 1000
CommandResetLimit_AL1 = 1000
CommandResetLimit_AL2 = 1000
CommandResetLimit_AL3 = 1000
CommandResetLimitDay_AL0 = 15
CommandResetLimitDay_AL1 = 15
CommandResetLimitDay_AL2 = 15
CommandResetLimitDay_AL3 = 15
CommandResetLimitWek_AL0 = 100
CommandResetLimitWek_AL1 = 100
CommandResetLimitWek_AL2 = 100
CommandResetLimitWek_AL3 = 100
CommandResetLimitMon_AL0 = 280
CommandResetLimitMon_AL1 = 280
CommandResetLimitMon_AL2 = 280
CommandResetLimitMon_AL3 = 280
CommandResetStartLevel_AL0 = 1
CommandResetStartLevel_AL1 = 1
CommandResetStartLevel_AL2 = 1
CommandResetStartLevel_AL3 = 1
CommandResetPoint_AL0 = 400
CommandResetPoint_AL1 = 400
CommandResetPoint_AL2 = 400
CommandResetPoint_AL3 = 400
CommandResetPointRateDW = 100
CommandResetPointRateDK = 100
CommandResetPointRateFE = 100
CommandResetPointRateMG = 100
CommandResetPointRateDL = 100
CommandResetPointRateSU = 100
CommandResetPointRateRF = 100

Offline Evangelio #5 on: October 13, 2017, 11:48:44 AM

  • *
  • Rank: Sup. destacado
  • Posts: 102
  • Gracias recibida: 130
Code: [Select]
;==================================================
; Reset Command Settings
;==================================================
CommandResetSwitch = 1
CommandResetType = 1
CommandResetEnable_AL0 = 1
CommandResetEnable_AL1 = 1
CommandResetEnable_AL2 = 1
CommandResetEnable_AL3 = 1
CommandResetAutoEnable_AL0 = 0
CommandResetAutoEnable_AL1 = 0
CommandResetAutoEnable_AL2 = 0
CommandResetAutoEnable_AL3 = 0
CommandResetCheckItem_AL0 = 0
CommandResetCheckItem_AL1 = 0
CommandResetCheckItem_AL2 = 0
CommandResetCheckItem_AL3 = 0
CommandResetMove_AL0 = 1
CommandResetMove_AL1 = 1
CommandResetMove_AL2 = 1
CommandResetMove_AL3 = 1
CommandResetQuest_AL0 = 0
CommandResetQuest_AL1 = 0
CommandResetQuest_AL2 = 0
CommandResetQuest_AL3 = 0
CommandResetSkill_AL0 = 0
CommandResetSkill_AL1 = 0
CommandResetSkill_AL2 = 0
CommandResetSkill_AL3 = 0
CommandResetLevel_AL0 = 600
CommandResetLevel_AL1 = 600
CommandResetLevel_AL2 = 600
CommandResetLevel_AL3 = 600
CommandResetMoney_AL0 = 10000000
CommandResetMoney_AL1 = 7000000
CommandResetMoney_AL2 = 7000000
CommandResetMoney_AL3 = 7000000
CommandResetCount_AL0 = 1
CommandResetCount_AL1 = 1
CommandResetCount_AL2 = 1
CommandResetCount_AL3 = 1
CommandResetLimit_AL0 = 1000
CommandResetLimit_AL1 = 1000
CommandResetLimit_AL2 = 1000
CommandResetLimit_AL3 = 1000
CommandResetLimitDay_AL0 = 15
CommandResetLimitDay_AL1 = 15
CommandResetLimitDay_AL2 = 15
CommandResetLimitDay_AL3 = 15
CommandResetLimitWek_AL0 = 100
CommandResetLimitWek_AL1 = 100
CommandResetLimitWek_AL2 = 100
CommandResetLimitWek_AL3 = 100
CommandResetLimitMon_AL0 = 280
CommandResetLimitMon_AL1 = 280
CommandResetLimitMon_AL2 = 280
CommandResetLimitMon_AL3 = 280
CommandResetStartLevel_AL0 = 1
CommandResetStartLevel_AL1 = 1
CommandResetStartLevel_AL2 = 1
CommandResetStartLevel_AL3 = 1
CommandResetPoint_AL0 = 400
CommandResetPoint_AL1 = 400
CommandResetPoint_AL2 = 400
CommandResetPoint_AL3 = 400
CommandResetPointRateDW = 100
CommandResetPointRateDK = 100
CommandResetPointRateFE = 100
CommandResetPointRateMG = 100
CommandResetPointRateDL = 100
CommandResetPointRateSU = 100
CommandResetPointRateRF = 100

Fijate que lo tenes al reves.



Ponelo Asi!


Probalo...

 

Related Topics

  Subject / Started by Replies Last post
6 Replies
508 Views
Last post April 16, 2017, 10:16:08 PM
by gelfor
4 Replies
226 Views
Last post May 05, 2017, 11:45:35 PM
by unico
1 Replies
111 Views
Last post July 18, 2017, 04:31:24 PM
by diegah
3 Replies
457 Views
Last post July 11, 2018, 05:25:24 PM
by pquintal
1 Replies
57 Views
Last post June 25, 2018, 01:04:35 PM
by FreeStyle